Your search - Milk Adulteration - did not match any content.
- Make sure all words are spelled correctly.
- Try different keywords.
- Try more general keywords.
In India synthetic milk is hot topic and every T.V channel is showing programme on it but no channel shows testing method for synthetic milk. Kindly let me know the fool proof testing procedure.
Answer: TESTS TO DETECT ADULTERATION IN MILK
If the addition of nitric acid drop by drop in to the test milk sample results in the development of orange colour, it indicates the milk is adulterated .
There are many methods known for detection of adulteration in milk but the methods discussed below are simple but rapid and sensitive methods to detect adulteration.
I. Detection of Neutralizers in milk
1) Rosalic acid test (Soda Test)
In milk neutralizers like hydrated lime, sodium hydroxide, sodium carbonate or sodium bicarbonate are added which are generally prohibited.
How to detect?
Take 5 ml of milk in a test tube and add 5 ml alcohol followed by 4-5 drops of rosalic acid. If the colour of milk changes to pinkish red, then it is inferred that the milk is adulterated with sodium carbonate / sodium bicarbonate and hence unfit for human consumption.
This test will be effective only if the neutralizers are present in milk. If the added neutralizers are nullified by the developed acidity, then this test will be negative. In that case, the alkaline condition of the milk for the presence of soda ash has to be estimated.
How to proceed?
2) Take 20 ml of milk in a silica crucible and then the water is evaporated and the contents are burnt in a muffle furnace. The ash is dispersed in 10 ml distilled water and it is titrated against decinormal (N/10) hydrochloric acid using phenolphthalein as an indicator. If the titre value exceeds 1.2 ml, then it is construed that the milk is adulterated with neutralizers.
II. Test for detection of hydrogen peroxide
Take 5 ml milk in a test tube and then add 5 drops of paraphenylene diamine and shake it well. Change of the colour of milk to blue confirms that the milk is added with hydrogen peroxide.
III. Test for detection of formalin
Formalin (40%) is poisonous though it can preserve milk for a long time.
How to detect?
Take 10 ml of milk in test tube and 5 ml of conc. sulphuric acid is added on the sides of the test tube with out shaking. If a violet or blue ring appears at the intersection of the two layers, then it shows the presence of formalin.
IV. Test for detection of sugar in milk
Generally sugar is mixed in the milk to increase the solids not fat content of milk i.e. to increase the lactometer reading of milk, which was already diluted with water.
How to detect?
Take 10 ml of milk in a test tube and add 5 ml of hydrochloric acid along with 0.1 g of resorcinol. Then shake the test tube well and place the test tube in a boiling water bath for 5 min. Appearance of red colour indicates the presence of added sugar in milk.
V. Test for detection of starch
Addition of starch also increases the SNF content of milk. Apart from the starch, wheat flour, arrowroot, rice flour are also added.
How to detect?
Take 3 ml milk in a test tube and boil it thoroughly. Then milk is cooled to room temperature and added with 2 to 3 drops of 1% iodine solution. Change of colour to blue indicates that the milk is adulterated with starch.
VI. Test for detection of glucose
Usually poor quality glucose is added to milk to increase the lactometer reading. There are two tests available to detect the adulteration of milk with glucose.
How to proceed?
1. Phosphomolybdic or Barford Test
Take 3 ml of milk in a test tube and add 3 ml Barford’s reagent and mix it thoroughly. Then keep it in a boiling water bath for 3 min and then cool it for 2 min by immersing in tap water with out disturbance. Then add 1 ml of phosphomolybdic acid and shake. If blue colour is visible, then glucose is present in the milk sample.
2. Diacetic test
Take a strip of diacetic strip and dip it in the milk for 30 sec to 1 min. If the strip changes colour, then it shows that the sample of milk contains glucose. If there is no change in the colour of the strip, then glucose is absent. In this method the presence of glucose in milk can be quantified by comparing the colour developed with the chart strip.
VII. Test for detection of urea
1. Urea is generally added in the preparation of synthetic milk to raise the SNF value.
Five ml of milk is mixed well with 5 ml paradimethyl amino benzaldehyde (16%). If the solution turns yellow in colour, then the given sample of milk is added with urea.
2. Take 5 ml of milk in a test tube and add 0.2 ml of urease (20 mg / ml). Shake well at room temperature and then add 0.1 ml of bromothymol blue solution (0.5%). Appearance of blue colour after 10-15 min indicates the adulteration milk with urea.
VIII. Test for detection of ammonium sulphate
The presence of sulphate in milk increases the lactometer reading.
How to proceed?
5 ml of hot milk is taken in a test tube and added with a suitable acid for e.g. citric acid and the whey thus separated is filtered. Collect the whey in another test tube and add 0.5 ml of 5% barium chloride. Appearance of precipitate indicates the presence of ammonium sulphate in milk.
IX. Test for detection of salt
Addition of salt in milk is mainly resorted to with the aim of increasing the corrected lactometer reading.
How to detect?
Five ml of silver nitrate (0.8%) is taken in a test tube and added with 2 to 3 drops of 1% potassium dichromate and 1 ml of milk and thoroughly mixed. If the contents of the test tube turn yellow in colour, then milk contains salt in it. If it is chocolate coloured, then the milk is free from salt.
X. Test for detection of pulverized soap
Take 10 ml of milk in a test tube and dilute it with equal quantity of hot water and then add 1 – 2 drops of phenolphthalein indicator. Development of pink colour indicates that the milk is adulterated with soap.
XI. Detection of detergents in milk
Take 5 ml of milk in a test tube and add 0.1 ml of bromocresol purple solution. Appearance of violet colour indicates the presence of detergent in milk. Unadulterated milk samples show a faint violet colour.
XII. Detection of water in milk
Though the adulteration of milk with water can be checked by lactometer reading, other adulterations too affect the lactometer reading. Hence freezing point depression, recognized by AOAC, is usually adopted.
Percentage of water added = Normal freezing point – Observed freezing point X 100
Normal freezing point
Normal freezing point of milk is taken as –0.55°C. A tolerance level of 3% is given which is equivalent to specifying a minimum freezing point depression for authentic milk of –0.55°C.
XIII. Detection of skim milk powder in milk
If the addition of nitric acid drop by drop in to the test milk sample results in the development of orange colour, it indicates the milk is adulterated with skim milk powder. Samples with out skim milk powder shows yellow colour.
XIV. Detection of vegetable fat in milk
The characteristic feature of milk is its fatty acid composition, which mainly consists of short chain fatty acids such as butyric, caproic, caprylic acid; whereas the vegetable fats consist mainly of long chain fatty acids and hence adulteration of vegetable fat in milk can be easily found out by analyzing the fatty acid profile by gas chromatography
Is there any way through which the adulteration of water in milk can be established and quantified? The method should be able to be done at a home, and not in a laboratory.
Answer: I suppose you could try and do a moisture analysis, all you'd need would be a scale, an oven and a desiccator (used to prevent moisture accumulation when item is cooling after being removed from oven.)
Take a certain mass of sample (say 100 grams, to make it easy) and place it in a WEIGHED aluminum dish (glass can work, but it's often too heavy to provide precise results). Record the mass of the dish and dish+milk. Dry the samples at 125C for an hour or so, allow to cool in the desicator and then weigh the results. Subtract the initial mass w. pan from the dried mass w. pan and that should be the amount of water lost. Take that and divide it by the initial mass (w/o pan) to get your % moisture loss. Milk has about 87-88% water and it's mostly unbound, so it should be easy to get an estimate for this product.
Since this is at home, you could likely get by without using a desiccator since your results won't likely be affected by what little moisture that may be present. (Perhaps consider letting it cool in the oven or some other very dry location with minimal air flow.)
DesiDieter Expert Chat
||Veg Wholesome Meal
1.5 cup Ven pongal + 1/2 katori Spring onion chutney +
|Get Eat Smart Alert in Your Inbox
News & Articles
Yoga is more than an exercise routine. It is a complimentary...